Security Alarm Planning for New Home Construction: What to Decide Before the Walls Close
Most people building a new home spend months on tiles, benchtops and power point positions. Security gets a passing thought around handover, when the builder asks if you’d like to “sort out an alarm.” By then the plasterboard is up, the paint is on, and every cable you want means cutting into a wall you’ve just paid to finish.
Actually, the best opportunity for these decisions is quite brief. After the frame is raised and the electrician has done the initial electrical work, you only have a few weeks before the drywalls get done. Alarm planning cost-wise is one of the smallest concerns, practically unnoticeable, during this phase. However, if you miss it you’ll still be able to obtain a satisfactory system. But it will mean you have to work against the house instead of with its layout.
Why rough-in is the sweet spot
During the rough-in stage of construction, the house resembles a mere frame. Electric wires traverse through the joists as well as the ceilings without anyone noting them, and installing the sensor costs the same, regardless of whether the location is correct or incorrect. After the drywall has been laid, it will be impossible to make any changes.
Even if the plan is to use wireless communication, then one should still run extra cables even before doing so, as doing that would have negligible costs.
Start with how you actually live
Prior to delving into the subject of sensors, take some time to give thought to your everyday week. Who enter and exits, at what time? Is it the kids or do they get home before you? Who takes your dog for a stroll at night? Is there anyone working from home at the moment or involves in shift work?
These answers shape the whole layout. With pets, sensors need to be chosen and placed carefully, or false alarms will teach everyone to ignore the siren. If you sleep upstairs, you’ll probably want to arm the downstairs only at night. A good installer will ask you all this. If they just start counting windows, that’s a red flag.
Where the panel and keypads go
The control panel is fussier than people expect. It should be hidden but reachable, close to power, with a clear cable path back to it. Linen cupboards, garage walls and under-stair spaces are common choices. Avoid anywhere that cooks in summer, like a roof space, or stays damp, like a badly ventilated subfloor. Heat and humidity wear out electronics faster than most people realise.
Keypads should sit where you really walk in, usually the main entry or the internal garage door. Plenty of families wish they’d added a second one near the master bedroom. Pre-wiring it now is a ten-minute job for the electrician. Later it’s a much bigger one.
Sensors: the obvious and the forgotten
Doors are easy. Front, back, sliders, garage entry. Windows are where people slip up, especially on double-storey homes. Ground-floor windows get all the attention, but upstairs windows beside a balcony or above a low roofline get forgotten.
Then there are spots that don’t look like entry points but are. A laundry window facing the side path. A pergola that turns the first floor into an easy climb. The garage, which in many homes is the weakest door in the building and opens straight inside.
For motion sensors, cover the routes an intruder would really take, like hallways and the main living area, rather than every room. More devices isn’t automatically better, and a thoughtful layout with fewer of them usually wins. Ask about glass-break sensors too, for big sliding doors or feature glazing that’s otherwise hard to protect.
Wired or wireless?
Wireless systems have evolved a lot and they are a great choice; especially for renovations. With a new build, you have a rare opportunity to decide. Wired sensors run without batteries and don’t lose signal behind the insulation.
If circumstances turn wireless, there is greater flexibility to wireless only after the requirements have changed.
A number of homeowners install a composite of both: wired sensors and panel at the core, and wireless for the rest. Discuss with your installer what is best for your home and not just the kind they like to sell.
Cameras, doorbells and lighting
Even if cameras aren’t in the budget yet, plan for them. Decide roughly where you’d want them: front door, driveway, side access, backyard. Then ask the electrician to run network cable to those spots, back to one central point. Cameras powered through a single network cable are neater and more dependable than ones relying on wifi.
The same goes for a video doorbell and sensor lighting. They’re easy to add later if the wiring’s there. If it isn’t, you’re drilling through brick or chasing walls.
Power and communication
In case a home security system only raises an alarm, the alarm must know about the problem. Many systems are wired to your home internet. That is an issue when the power goes out since the modem will stop working. The second issue is that someone will have to go out into the yard and manually take down the network by unplugging the modem. So, if you want to have peace of mind even if the power gets cut, you may need a cellular backup, such that it will still send alerts to your phone or even the monitoring centre during the outage.
In order to have the alarm panel with a battery backup, you will have to place the AC power point very close to it. Furthermore, if you are planning on having NBN installed, the main box will likely be located very close to the alarm panel. If you figure out what you need for the panel location and also what space you will have for NBN, you would save yourself a lot of hassle because the cable route will be the same. Thus, it is wise to tackle both tasks together in order to avoid unnecessary work and a messed-up situation.
Get the builder and the alarm installer talking
This is where things often go sideways. The builder’s electrician and the alarm installer are usually different people, and neither is automatically told about the other. That job falls to you.
Get an alarm company to look at the plans, or better, walk the frame with you. Ask for a simple sketch showing panel, keypad and sensor positions, and give a copy to the builder. If you’re after alarm installation in Sydney, most local installers are used to working alongside builders and will happily do this before lock-up.
Check your contract too. Some builders include basic security pre-wiring, and others charge a variation fee if you ask late. Better to know now than at handover.
A short list before the walls close
- Where will the panel live, and is there power nearby?
- Which doors and windows need sensors, including upstairs and the garage?
- Where do you want keypads, and do you need one by the bedroom?
- Where might cameras, a doorbell and outdoor lights go?
- Is there a plan for backup communication if the internet drops?
- Has your alarm installer spoken to your builder’s electrician?
Conclusion
None of this is complicated, but it’s very time-sensitive. A few small decisions at the frame stage can mean a cleaner install, fewer visible cables, better coverage and a lower final bill. Leave it to the end and you’re patching around a finished house.
If you’re building and the frame is going up, now’s a good time to book a walkthrough. An hour with a good installer before the plasterboard arrives can save you a lot of hassle later.