Trikdis

The G16 connects to compatible DSC, Paradox, UTC Interlogix (CADDX), Innerrange, Texecom, Honeywell, Crow and Pyronix alarm panels. Also its perfect tool to remotely monitor and control devices and systems to detect faults and malfunctions in seconds to minimise downtime and maximise services efficient

Reliable communication

• communication with two different CMS at same time
• +backup channels
• *reported to CMS with SMS messages when IP connection stops.
  Supervision heartbeats

Fast and easy setup

• USB connector for setup via PC.
• Slot for SIM card of any GSM operator
• Control by Protegus mobile app.
• *Control by SMS

Controllable outputs and inputs:

• 3 double I/O terminals
• Add additional inputs and controllable
• outputs with wired and wireless iO expanders.

SENDS EVENTS TO MONITORING STATION RECEIVER:
• Sends events to TRIKDIS software or hardware receivers that work with any monitoring software.
• Can send event messages to SIA DC-09 receivers.
• Connection supervision by polling to IP receiver every 10 seconds (or by user defined period).
• Backup channel, that will be used if connection with the primary channel is lost.
• When Protegus service is enabled, events are first
delivered to CMS, and only then are sent to app users.

WORKS WITH PROTEGUS APP:
• “Push” and special sound notifications informing about events.
• Remote system Arm/Disarm.
• Remote control of connected devices (lights, gates, ventilation systems, heating, sprinklers, etc.).
• Different user rights for administrator, installer and user.

CONTROLLABLE OUTPUTS AND INPUTS:
• 2 input, selectable type: NC, NO, EOL=2.2 kΩ
• 1 output controlled via:
• Mobile/Web application

QUICK SETUP:
• Settings can be saved to file and quickly written to other communicators.
• Two access levels for configuring the device for CMS administrator and for installer.
• Remote configuration and firmware updates.